Saturday, June 5, 2010

Dome Sanding

Covering the countersunk screw heads with Super Glue and sanding them smooth took more effort than I expected. It eventually turned out great; but I had to do several passes with adding Super Glue to the heads, letting it dry, and then sanding it to make sure all the little holes were filled and the end product was felt seamless with the dome.

I then used 330 grit sand paper to sand the entire dome. I'm not posting any pictures because you really can't tell the difference from a photo. The dome is slightly more dull than it was before, but the texture is different.

No comments:

Post a Comment