Thursday, May 19, 2011

Electronics Panel Started

In my continuing attempts to divide the electronics between the dome and the body, I started installing an electronics panel. for my first attempt, I decided to use a piece of Lexan I had lying around. I cut it slightly larger than the back opening. I then picked up some cheap hinges with removable pins so I could pull the entire panel out of the body to work on it. I still need to chisel out the area where the hinges attach to the frame on the left side and install some type of latch or magnet on the right side. Once that is done, I can pull the panel off and start adding the Electronic components to it.

No comments:

Post a Comment