After the Arrows to Aerospace Parade and the Cub Scout meeting I really wanted to work on my R2. I stopped by Moose's house and finished routing and cutting my frame. On the next build day, I will bring my skins over and do a dry fit to make sure everything lines up before I glue the frame together.
I'm standing next to my fully routed/cut frame.
I routed out the space in the frame ring for the coin slot.
The hole was cut for the center leg.
The edges of the base frame board where cut to allow the feet and the battery boxes to slide by easily.
I put Mooses skins on my frame to see how much sanding needs to be done to get my skins to fit properly. I wish the frame plans were a little more accurate.
No comments:
Post a Comment